Supersonic Wave Mold Washer
Ultra-precision Mold Padding Welder
Supersonic Lapping Machine
Discharge Deposition Equipment
Tips for LAPTRON
WAVE CLEAN U600 TYPE-1
Removing Mold Deposit(MD)!!
Polyacetal(POM)!! / Polycarbonate!! / Elastomer!
Complete cleaning machine, TYPE-1, equipped with an overflow tank for preventing re-adhesion of stains, a filter for maintaining cleaning detergent in the best condition, and a drain tray, information timer, controllable heater, and circulation pump. Besides, pipes requiring maintenance are arranged on the front of the machine. Try the advanced performances of the TYPE-1.
Contamination removed from the mold rises to the liquid surface and then flow into the overflow tank, thus preventing re-contamination.
The filter removes contamination of the cleaning liquid to maintain purity, thus keeping the liquid in the optimum condition.
The cleaning tank cover opens and closes by 180°. The back of the cover serves as a drain tray and facilitates draining after cleaning. Cleaning detergent collected on the tray flows into the cleaning tank, ensuring safety.
The use of a heater will generate a temperature difference at the upper and the lower part of the liquid in the washing tank. The Wave Clean washer stirs up the cleaning liquid evenly with the circulating pump. The reflux flow of the liquid prevents generation of uneven temperatures in the washing tank. As a result, the mold can be cleaned without unevenness and in every hole and corner.
Service & Support
Information Desk for Telephone/FAX