Complete cleaning machine

Removing Mold Deposit(MD)!!

Polyacetal(POM)!! / Polycarbonate!! / Elastomer!

Complete cleaning machine, TYPE-1, equipped with an overflow tank for preventing re-adhesion of stains, a filter for maintaining cleaning detergent in the best condition, and a drain tray, information timer, controllable heater, and circulation pump. Besides, pipes requiring maintenance are arranged on the front of the machine. Try the advanced performances of the TYPE-1.

Product_Supersonic Wave Mold Washer_WC U600 Type-1


U600 Type-1

U600 Type-2

Overflow Tank

Barrier Filter

Drain Tray

Contamination removed from the mold rises to the liquid surface and then flow into the overflow tank, thus preventing re-contamination.

The filter removes contamination of the cleaning liquid to maintain purity, thus keeping the liquid in the optimum condition.

The cleaning tank cover opens and closes by 180°. The back of the cover serves as a drain tray and facilitates draining after cleaning. Cleaning detergent collected on the tray flows into the cleaning tank, ensuring safety.

Circulating pump

Comparative temperature rise

Heater with controls

The heater will raise the cleaning liquid temperature in the tank to enhance the cleaning effect. The temperature is adjustable in the range from 0 to 70 ゚C by digital control.

The use of a heater will generate a temperature difference at the upper and the lower part of the liquid in the washing tank. The Wave Clean washer stirs up the cleaning liquid evenly with the circulating pump. The reflux flow of the liquid prevents generation of uneven temperatures in the washing tank. As a result, the mold can be cleaned without unevenness and in every hole and corner.

Liquid shortage sensor

Digital controll timer

High performance vibrator

The cleaning process time is controlled by the digital control timer, thus enhancing the efficiency of cleaning.

The sensor detects the absence of cleaning liquid and shuts down the system automatically. You do not have to worry about heating without liquid during the unattended cleaning process.

The high-performance vibrator with the oscillation frequency of 28 kHz clean mold from every hole and corner.

Standard Accessories

Multipurpose cleaning liquid  SP-18

Washing cage (mesh type)

Hose for bleeding off the cleaning liquid

Rubber gloves

pH-test paper

Pump for cleaning liquid

Protective mask

Protective glasses

Barrier filter


Outside dimensions


Tank dimensions

Cage dimensions

Max. liquid amount

Power consumption

Supersonic wave output


Oscillation frequency

Power requirement

W1100 X D665 X H735

Apx.138kg(main unit only)

W450 X D350 X H250

W440 X D340 X H200




(variable with potentiometer)



Part of the specifications and the exterior appearance are subject to change without notice for improving the product.

Ideal for cleaning stains caused

by molding plastic resin containing glass filler!

■Resin coating of metal injection

■Mold deposits(MD)

Polyacetal(POM) /   Polycarbonate / Elastomer

■Gas stains

■Oil stains



The definitive all-purpose cleaning liquid for mold cleaning

Packaging : 18L

Request for materials・Contact

For online inquiries, please use the form.

For inquiries by phone or fax,

please use this number.

Contact us

TEL +81-3-3376-3464

FAX +81-3-3374-0346

Copyright © SANWA SHOKO Co.,Ltd. All Rights Reserve

With circulating pump  The heater is preset at 60 ℃

When 35 minutes pass after the start of heating, there is almost no temperature difference between the surface and the lower part of the vessel.

No circulating pump  The heater is preset at 60 ℃

When 35 minutes pass after the start of heating, a temperature difference of about 38℃ occurs between the surface and the lower part of the vessel.