Feature

Spec

Special

Common

Catalog

Simple & Compact design washer with selected functions

Removing Mold Deposit(MD)!!

Polyacetal(POM)!! / Polycarbonate!! / Elastomer!

The "Type-2" model is a simple-design washer with selected functions. It features the circulating pump, heater with controls, and a digital timer with a simple design, thus enabling comfortable and simple cleaning work.

Product_Supersonic Wave Mold Washer_WC U600 Type-2

U300

U600 Type-1

U600 Type-2

Compact Design

Wide-type washing cage

Even though it has a compact design, it comes standard with a wide type washing basket. Many molds can be cleaned at once.

The outside dimensions are 750 mm in width, 760 mm in depth, and 650 mm in height, and the compact design is not location selective. In addition, the simple design is the result of narrowing down the features to only the necessary functions. This delivers a convenient, simple washing operation.

Circulating pump

Comparative temperature rise

Heater with controls

The heater will raise the cleaning liquid temperature in the tank to enhance the cleaning effect. The temperature is adjustable in the range from 0 to 70 ﾟC by digital control.

The use of a heater will generate a temperature difference at the upper and the lower part of the liquid in the washing tank. The Wave Clean washer stirs up the cleaning liquid evenly with the circulating pump. The reflux flow of the liquid prevents generation of uneven temperatures in the washing tank. As a result, the mold can be cleaned without unevenness and in every hole and corner.

Liquid shortage sensor

Digital controll timer

High performance vibrator

The cleaning process time is controlled by the digital control timer, thus enhancing the efficiency of cleaning.。

The sensor detects the absence of cleaning liquid and shuts down the system automatically. You do not have to worry about heating without liquid during the unattended cleaning process.

The high-performance vibrator with the oscillation frequency of 28 kHz clean mold from every hole and corner.

Standard Accessories

Multipurpose cleaning liquid  SP-18

Washing cage (mesh type)

Hose for bleeding off the cleaning liquid

Rubber gloves

pH-test paper

Pump for cleaning liquid

Protective mask

Protective glasses

Barrier filter

Specifications

Outside dimensions

Weight

Tank dimensions

Cage dimensions

Max. liquid amount

Power consumption

Supersonic wave output

 

Oscillation frequency

Power requirement

W570 X D420 X H700

Apx.75kg（main unit only）

W450 X D350 X H250

W440 X D340 X H200

36L

3.65kW

 0～600W

(variable with potentiometer）

28kHz

AC200V

●

Part of the specifications and the exterior appearance are subject to change without notice for improving the product.

Ideal for cleaning stains caused

by molding plastic resin containing glass filler!

■Resin coating of metal ■injection

■Mold deposits(MD)

■Polyacetal(POM) / 　　■Polycarbonate / ■Elastomer

■Gas stains

■Oil stains

■Rust

 

The definitive all-purpose cleaning liquid for mold cleaning

Packaging : 18L

Request for materials・Contact

For online inquiries, please use the form.

For inquiries by phone or fax,

please use this number.

Contact us

TEL +81-3-3376-3464

FAX +81-3-3374-0346

Copyright © SANWA SHOKO Co.,Ltd. All Rights Reserve

With circulating pump  The heater is preset at 60 ℃

When 35 minutes pass after the start of heating, there is almost no temperature difference between the surface and the lower part of the vessel.

No circulating pump  The heater is preset at 60 ℃

When 35 minutes pass after the start of heating, a temperature difference of about 38℃ occurs between the surface and the lower part of the vessel.